Upload the seed backup to the data center

Prepare the upload device and USB drive for the seed backup transfer

After the seed backup is complete, the next stage is to upload the files to the online data store. This is achieved by connecting the USB drive to a device with a stable high-speed internet connection and running the Server Tool application.

Download and unpack the server utility package for your system:

Server Tool

Backup Manager Version

Pre-17

Server Tool 32-bit

Server Tool 64-bit

From 17

Server Tool 32-bit

Server Tool 64-bit

The version of Server Tool corresponds to the architecture of the device the files are uploaded from, rather than the architecture of the device the seed backup initially came from.

Transfer the Seed Backup to the data store

The transfer of the seed backup is initiated from the command prompt on the upload device.

Open a command prompt then navigate to the Seed Loading Tool directory containing servertool.exe and enter the following command to begin the upload process:

ServerTool.exe seeds.upload -path <UniqueID-Folder> -threadscount <n>

Where <UniqueID-Folder> is the name of the storage account to upload and <n> is a number.

For example, if the seed loading storage device is showing the drive letter E:\ and the device name shows as 'uk1234abc9876def' an example command to use would be

ServerTool.exe seeds.upload -path e:\uk1234abc9876def -threadscount 1

ServerTool.exe uploads multiple files simultaneously with the threadscount setting used to specify the number of upload connections. As such changing this value (to a maximum of 10) can increase the speed of the backup.

The seed backup upload could potentially take several hours to complete so please wait until the following message is displayed:

'Seeds upload for account '<UniqueID>' has finished'

At this stage the Backup Tab within the Dashboard for the device the seed backup came from will be populated with the plugin (data source) information.

To run the backups and force a synchronization of the data on the server, select the target device in the Dashboard and from the Server or Workstations drop-down, or right-click on the device, select Backup & Recovery, Run all Backups. Otherwise the backup will run in line with its schedule.

Q: How long after the seed loading process will it take for the data to appear in the Dashboard?

A: The results should be almost instantaneous so as soon as the upload process had finished check the dashboard will then show under the Backup Tab for the device all the backup plugin (data source) data

While the data is on its way, the Backup Manager stays functional, so you can continue backing up data to the cloud or a local directory. Although please be aware that data recovery options are temporarily limited.