Mikrotik Power Supply Status

The Power Supply (Mikrotik) Check monitors the power supply on the specified Mikrotik device.

Basic Check information

Check Type SNMP
Supported Systems/Applications SNMP-enabled devices that support the MIKROTIK-MIB
Device Class Router


Issue Corrective Action
Failed Please check that the correct SNMP community string is configured in Network Discovery for the device
201 Exception OID_TYPE_NOSUCHOBJECT Missing OID object on the device for specific metric

SNMP Properties Queried

Object Descriptors Numerical OID

Calculations Performed

Status Detail Description
Power Supply State

Power supply state from mtxrHlPowerSupplyState

  • Pass: 1
  • Fail: Less than 0 or Greater than or equal to 2
Backup Power Supply State

Backup power supply from mtxrHlBackupPowerSupplyState

  • Pass: 1
  • Fail: Less than 0 or Greater than or equal to 2

Voltage from mtxrHlVoltage

  • Pass = Between 240 and 250

  • Fail = Less than 240 or Greater than 250


Wattage from mtxrHlCurrent

  • Pass = Between 230 and 240

  • Fail = Less than 230 or Greater than 240

Current (Amps)

Current from mtxrHlCurrent

  • Pass = Between 960 and 970

  • Fail = Less than 960 or Greater than 970