Remote Monitoring & Management Help

Add a Script Check - Single Device

Script Checks may be added on a single device or multiple computers.

Individual Device

  1. Select the device in the north pane of the Dashboard
  2. Go to the Checks tab
  3. Add Check
  4. Choose the Check frequency
    1. Add 247
    2. DSC Check
  5. Script Check
  6. Configure the Check
    1. Select the script
    2. Click Next to configure the script
    3. Enter or configure the script parameters (if required)
    4. Set a Script timeout in the range 1 - 3600 seconds (default 120 seconds)
    5. To run an Automated Task when the Check fails choose Assign a Task after creating the Check (Windows and Mac)
  7. Finish to save and apply
  8. Where Assign a Task after creating the Check is selected (Windows and Mac)
    1. Select the script
    2. Click Next
    3. Enter the Command Line parameters (if required)
    4. Set a Script timeout in the range 1 - 3600 seconds (default 120 seconds)
  9. Finish to save and apply

Add Script Check and Choose Script

247_script_check script_check_select

Add Script Check and Choose Script

script_add