Remote Monitoring & Management Help

HP ProCurve Sensor Status Check

The HP ProCurve Sensor Status Check uses SNMP to monitor the sensor status on an HP ProCurve switch.

Basic Check information

Check Type SNMP
Supported Systems/Application SNMP-enabled devices that support HP’s STATISTICS-MIB
Supported Device Class Switch

Troubleshooting

Issue Corrective Action
Failed Please check that the correct SNMP community string is configured in Network Discovery for the device.
201 Exception OID_TYPE_NOSUCHOBJECT Missing OID object on the device for specific metric

Metrics

Name Default Thresholds
Status

Normal: 4

Failed: 1, 2, 3, 5

Status Description No thresholds
Number of Times the Sensor Has Reported a Warning State No thresholds
Number of Times the Sensor Has Reported a FailedState

No thresholds

SNMP Properties Queried

Variable Name SNMP OID
TargetValue 1.3.6.1.4.1.11.2.14.11.1.2.6.1.7
Status 1.3.6.1.4.1.11.2.14.11.1.2.6.1.4
WarningsCount 1.3.6.1.4.1.11.2.14.11.1.2.6.1.5
FailuresCount 1.3.6.1.4.1.11.2.14.11.1.2.6.1.6

Calculations Performed

Variable Name Calculation
Status Description

Status mapped to:

1 - Unknown

2 - Bad

3 - Warning

4 - Good

5 - Not Present

Number of Times the Sensor Has Reported a Warning State WarningsCount
Number of Times the Sensor Has Reported a Failed State FailuresCount