Physical Drive (EqualLogic) Check
The Physical Drive (EqualLogic) Check monitors the overall status of a physical drive attached to a Dell EqualLogic SAN.
Basic Check information
|Instances on a Device
||Dell EqualLogic SANs that support the EQLMEMBER-MIB MIB.
||Server - Generic and Server - Windows
||Please check that the correct SNMP community string is configured in Network Discovery for the device
||Missing OID object on the device for specific metric
|Drive Status Description
Describes the current status of the physical drive. The possible values are:
||The disk is used in the RAID set.
||The disk is not currently used by a RAID configuration but may be used when status of a currently on-line disk changes.
||Either the disk is faulty or when there is no power.
||The disk doesn't fall into any of these other categories.
||The drive is too small to be used. The drive cannot be converted to spare.
||The drive has a history of failures. The drive can be converted to spare.
||The drive label is from a later release. The drive can be converted to spare.
||The drive is unhealthy.
||The drive is a replacement drive.
||The drive is encrypted and cannot be decrypted.
||The drive is not DELL approved.
||The drive is off-line due to excessive errors.
|Disk Serial Number
||The serial number of the physical drive.
|Disk Model Number
||The model name and/or number of the physical drive.
|Disk Model Revision Number
||The firmware revision number of the physical drive.
|Disk Error Count
||The number of disk errors that have taken place since the physical drive was last powered on.
|Disk Capacity (MB)
||The size of the physical drive.