Remote Monitoring & Management Help

APC PDU Check

The APC PDU Check monitors the phase status of the phase (circuit) and reports the low/medium/high thresholds for that sensor, as dictated by the PDU.

Basic Check information

Check Type SNMP
Instances on a Device 3
Supported Systems/Applications Any APC PDU device that supports the PowerNet392 SNMP MIB.
Device Class Other

Troubleshooting

Issue Corrective Action
Failed Please check that the correct SNMP community string is configured in Network Discovery for the device
201 Exception OID_TYPE_NOSUCHOBJECT Missing OID object on the device for specific metric

OID/Calculation

Metric Name

OID/Calculation

Load (Amperes) 1.3.6.1.4.318.1.1.12.2.3.1.1.2/ 10
Maximum Acceptable Load (Amperes) 1.3.6.1.4.318.1.1.12.2.2.1.1.4
Phase Utilization ((Load/10)/Maximum Acceptable Load)*100